Custom Roto Molding Services Supplier

Boguan-Professional Rotational Molding Manufacturer Provide OEM Service Over 15 Years.

Rotational Molding SERVICE

We provide you withrotational molding service and professional teams provide you with customized processing services. The following are the relevant service processes:

① Contact: get in touch with the salesman of our company and inform them of the requirements and provide drawings.

② Price evaluation: Our company will evaluate the price according to the drawings and issue offer sheet; Both parties reach an agreement on the price, sign the contract and pay the full amount.

③ Drawing analysis: the product drawings will be comprehensively analyzed until the drawings fully meet the processing technology and customer assembly requirements.

④ Mold opening: mold opening shall be carried out according to the drawings, and the first sample shall be produced within 25-30 days; Both parties shall confirm the samples to prepare for mass production.

⑤ Production: mass production. After the production is completed, it will be delivered to the destination as agreed.

Rotational molding process

Rotational molding process is a thermoplastic hollow rotary molding method, its basic steps include:

01 Preparation of raw materials

Prepare plastic raw materials (which can be powder or liquid polymer). These raw materials have usually undergone a series of treatment and mixing to ensure the stability of their quality and performance.

02 Mold preparation

select a suitable mold and apply release agent on the mold so as to take out the product from the mold and avoid damage caused by excessive adhesion between the product and the mold.

03 Filling raw materials

Add the prepared plastic raw materials into the mold.

04 Heating and rotating

The mould rotates and heats continuously along the two vertical axes. Under the action of gravity and heat energy, the plastic raw materials in the mould are gradually evenly coated and fused and adhered to the whole surface of the mould cavity to form the desired shape.

05 Cooling setting:

After the resin is completely melted and evenly adhered to the inner wall of the mold cavity, stop heating and transfer to the cooling process, and cool the product through forced ventilation or water spraying to cool and consolidate the product.

06 Demoulding and post-treatment

when the product is cooled down, the mold is opened and the finished parts are taken away. Post-processing, such as cleaning and polishing, may be required as required.

Rotational Molding Vs.Injection Molding and Blow Molding: Differences And Advantages

High design flexibility

Advantages: Ability to manufacture complex geometric shapes and large hollow products, low mold cost, suitable for small batch or customized production.
Difference: Injection molding and blow molding are difficult to achieve complex designs, and the mold cost is high.

Uniform wall thickness

Advantages: The material is evenly distributed through rotation to ensure consistent wall thickness and improve product strength and durability.
Difference: Injection molding and blow molding are prone to uneven wall thickness in complex shapes.

No internal stress

Advantages: No pressure during production, reducing internal stress and reducing the risk of product deformation or cracking.
Difference: Injection molding and blow molding are prone to internal stress due to high pressure, which affects product performance.

High material utilization

Advantages: No waste is generated, high material utilization, suitable for expensive or special materials.
Difference: Injection molding and blow molding will produce gates and flash, and there will be more material waste.

Low mold cost

Advantages: The mold is simple and low cost, suitable for small batch or customized production.
Difference: Injection molding and blow molding molds are complex and expensive, suitable for mass production.

Suitable for large products

Advantage: Can produce large hollow products, such as fuel tanks, audio equipment, amusement equipment, etc.
Difference: Injection molding has high investment costs for large products and is not suitable for large products

Good surface quality

Advantage: The product surface is smooth, reducing the need for post-processing.
Difference: Injection molding and blow molding may require more post-processing.

Environmental protection

Advantage: No harmful gas emissions, recyclable materials, in line with environmental protection requirements.
Difference: Injection molding and blow molding may produce harmful gases and waste.

Integrated molding

Advantage: The overall product is molded in one time, and the tank body has better airtightness and is not easy to leak
Difference: Injection molding may require multiple parts to be assembled, and there will be leakage problems when storing liquids.

If you consult our products, you will get unexpected discounts, please contact us immediately.

It is well received by buyers and has achieved good social and economic effects. Choose what you need, do my best to provide our customers with better quality products and more perfect service.

Feel Free To Contact With Us

If you have any questions about our products or services, feel free to reach out to customer service team.

Ready to work with us ？

wang.x.l@boguanroto.com

Boguan has the leading rotoplastic processing technology, and can design and manufacture aluminum alloy, iron plate and other molds for users according to the different geometric shapes and requirements of products.

Quick Links

Product Cases

Plastic Auto Parts

Plastic Oil Tank

Plastic Case

Other Rotational Molding Products

Auto Toolbox

Car Speaker Enclosure

Auto Snorkel

Contact: Wang Xueliang

Tel: 86-18923153773

Email: Wang.x.l@boguanroto.com

WhatsApp: 18923153773

ADD: Lishui Town, Nanhai District, Foshan City, Heshun Yongshui Development Zone, China