Analysis On Processing Technology Of Rotomolded Fuel Tank

There are many things to pay attention to when processing rotomolded fuel tanks. Pressure control is very important. We should pay attention to some details when producing. The processing is simple, so the power of manufacturers is constantly increasing. This industry is so good. I believe there are many places that attract everyone.

Molding rotomolding fuel tank processing technology. During the molding process, the plastic and the mold are under very high pressure (pressure). For example, it is widely used in injection molding, compression molding, extrusion, blow molding, etc., so these molding processes are used. When producing large plastic parts, not only must molds that can withstand a lot of pressure be used, making the molds bulky and complex, but the plastic molding equipment must also be designed and manufactured very solidly, making the processing and manufacturing of the molds more difficult and costly. Increase.

On the contrary, since the rotomolding oil tank process only requires that the frame be strong enough to support the weight of the material, mold and frame itself, as well as the mold closing force to prevent material leakage, even if the rotomolding of large and extra-large plastic parts is required, Using very heavy equipment and molds, the processing and manufacturing of machine molds is very convenient, the manufacturing cycle is short, and the cost is low. The mold is not affected by external forces, so the mold is simple, cheap and easy to manufacture. Rotational molding equipment also has great maneuverability. It can install one large mold or arrange multiple small molds.